Your car's engine relies on accurate information to start, run smoothly and deliver the right amount of power. Two important components responsible for providing this information are the crankshaft position sensor and the camshaft position sensor.
When either sensor develops a fault, you may experience difficulty starting the engine, unexpected stalling, rough running or an illuminated engine warning light.
But how do you know when a sensor needs replacing? Can you continue driving with a faulty sensor, and should both sensors be replaced at the same time?
In this guide, we explain what these sensors do, the warning signs of failure and when to arrange professional diagnostics.
What Does a Crankshaft Position Sensor Do?
The crankshaft position sensor monitors the position and rotational speed of the engine's crankshaft. This information allows the engine control unit (ECU) to coordinate important functions, including ignition timing and fuel injection.
Without a reliable crankshaft signal, the engine computer may struggle to determine when certain engine functions should occur.
Depending on the vehicle, a faulty crankshaft position sensor can prevent the engine from starting or cause it to stop running unexpectedly.
Signs your crankshaft sensor may need replacing
Watch for these common symptoms:
The engine won't start: The starter motor may turn the engine over, but the engine may fail to fire.
Unexpected engine stalling: The engine may cut out while driving or when coming to a stop.
Intermittent starting problems: The car may start normally sometimes but fail to start on other occasions.
Difficulty restarting when hot: Some sensor faults occur only after the engine compartment heats up.
Engine warning light: The ECU may store a fault code relating to the crankshaft position signal.
Poor running or hesitation: An unreliable signal may affect engine operation.
These symptoms are warning signs rather than proof that the sensor has failed. Wiring faults, damaged trigger wheels, ignition problems and fuel system faults can produce similar issues. <Cite refs={["turn601652search3","turn601652search4"]}/>
What Does a Camshaft Position Sensor Do?
The camshaft position sensor monitors the position of the camshaft, which controls the opening and closing of the engine's valves.
The ECU uses this information alongside crankshaft position data to determine the engine's operating cycle and coordinate functions such as fuel injection and ignition timing. On vehicles with variable valve timing, related control systems also use camshaft position information.
If the camshaft sensor stops providing a reliable signal, the engine may run poorly, take longer to start or enter a reduced-performance mode. The exact symptoms depend on the vehicle and engine design.
Signs your camshaft sensor may need replacing
Possible warning signs include:
Longer starting times: The engine takes longer than usual to start.
Rough idling: The engine runs unevenly while stationary.
Hesitation during acceleration: The engine feels sluggish or responds inconsistently.
Engine misfires: The engine may run unevenly or lose power.
Reduced fuel efficiency: Engine management may not operate as intended.
Engine warning light: A fault code may indicate a problem with the camshaft position signal or its circuit.
A camshaft sensor fault can resemble a crankshaft sensor problem. Variable valve timing faults, incorrect mechanical timing and damaged wiring can also cause related symptoms. Proper testing is needed before replacing parts. <Cite refs={["turn601652search5","turn601652search6"]}/>
When Should You Replace These Sensors?
Unlike timing belts, engine oil or filters, crankshaft and camshaft position sensors generally do not have a universal scheduled replacement interval.
They are normally replaced when a fault has been identified and testing indicates that the sensor itself is defective.
You should consider arranging a diagnostic inspection in the following situations.
1. Your Car Struggles to Start
If the engine turns over but does not start, either sensor could be one possible cause.
A faulty crankshaft sensor can prevent the ECU from receiving the engine position signal it needs. A camshaft sensor fault can also cause starting difficulties, depending on the engine's design.
However, a flat battery, faulty starter motor, fuel delivery problem or ignition fault can produce similar symptoms.
If your car repeatedly struggles to start, arrange testing rather than replacing sensors based on symptoms alone.
2. Your Engine Cuts Out Unexpectedly
An engine that suddenly stalls while driving needs prompt attention.
An intermittent crankshaft position signal can cause the engine to stop running, particularly if the sensor or its wiring fails when hot or under vibration.
A camshaft sensor fault may also cause stalling in some vehicles.
Because unexpected stalling can affect your ability to maintain control and safely manoeuvre, pull over when safe and arrange professional assistance if the engine continues to cut out.
3. The Engine Warning Light Comes On
An illuminated engine warning light can indicate a problem with a sensor, its electrical circuit or another engine management component.
A diagnostic scanner may identify codes associated with the crankshaft position sensor, such as the P0335 code family, or the camshaft position sensor, such as the P0340 code family.
These codes do not automatically mean the sensor must be replaced. A technician should check the exact code, manufacturer-specific information, wiring, connectors and sensor signals before deciding on the repair.
4. The Problem Keeps Returning After a Restart
Some sensor faults are intermittent. Your car may start and drive normally before the problem returns later.
For example, a heat-sensitive sensor or damaged electrical connection may work when cold but fail once the engine reaches operating temperature.
If the warning light disappears after restarting, that does not necessarily mean the fault has been fixed. Stored fault codes and live diagnostic data can help identify intermittent problems.
5. Diagnostic Testing Confirms the Sensor Has Failed
The strongest reason to replace a crankshaft or camshaft sensor is evidence that it is no longer operating correctly.
Depending on the vehicle, a technician may inspect the wiring and connector, check power and ground where applicable, monitor live engine data and test the sensor's output signal.
If the signal is missing or incorrect and the surrounding circuitry and mechanical components have been checked, sensor replacement may be the appropriate solution.
Should You Replace Both Sensors at the Same Time?
In most cases, there is no automatic need to replace both sensors together.
If testing confirms that one sensor has failed and the other is functioning correctly, replacing only the faulty component is usually appropriate.
A mechanic may recommend additional work if both sensors have faults, related wiring is damaged or the manufacturer specifies a particular repair procedure. The decision should be based on the vehicle's condition and diagnostic findings.
Replacing both sensors without establishing the cause can add unnecessary expense and may leave the original problem unresolved.
Can You Drive With a Faulty Crankshaft or Camshaft Sensor?
This depends on the fault and the vehicle.
Some cars may continue running with a camshaft sensor fault, although starting, performance or emissions may be affected. A crankshaft sensor fault can cause sudden stalling or prevent the engine from restarting.
If your engine stalls repeatedly, loses significant power or behaves unpredictably, stop somewhere safe and arrange recovery or professional assistance.
If the engine warning light is flashing, or the car is misfiring badly, avoid continuing to drive because further damage may occur. Follow any dashboard warnings and your vehicle handbook.
Even if the car appears to run normally, arrange an inspection promptly when a sensor fault is suspected.
What Causes Crankshaft and Camshaft Sensors to Fail?
Several factors can contribute to sensor problems:
Heat and age: Repeated exposure to high engine temperatures can damage internal electronics.
Wiring damage: Worn insulation, broken wires or loose connections can interrupt the signal.
Corrosion or contamination: Moisture, corrosion or debris can affect the sensor or its connector.
Physical damage: A damaged sensor or trigger wheel can produce an incorrect signal.
Installation problems: Incorrect fitting or sensor positioning can affect operation.
Sometimes the sensor is working correctly but is reporting a genuine timing problem elsewhere in the engine. This is another reason accurate diagnosis matters.
How Can You Help Prevent Sensor Problems?
Although sensor failure cannot always be prevented, sensible vehicle maintenance can help identify potential issues early.
Follow your vehicle manufacturer's recommended servicing schedule.
Investigate recurring engine warning lights promptly.
Address damaged wiring or corroded electrical connections.
Keep the engine in good mechanical condition.
Have persistent starting or stalling problems checked rather than repeatedly restarting the car.
Use the correct replacement part and installation procedure when repairs are required.
There is generally no benefit in replacing a correctly functioning sensor simply because the vehicle has reached a particular mileage.
Final Thoughts
Crankshaft and camshaft position sensors play important roles in modern engine management. When either develops a fault, your car may struggle to start, stall unexpectedly, run unevenly or display an engine warning light.
However, these symptoms can also be caused by wiring faults, fuel system problems, ignition issues or mechanical timing faults.
The best time to replace a crankshaft or camshaft sensor is when proper diagnostic testing confirms that the sensor is faulty. Replacing parts based on guesswork can waste money and fail to resolve the underlying problem.
If your vehicle has recurring starting difficulties, unexpected stalling or an engine warning light, arrange a diagnostic inspection to identify the cause.
For information about vehicle maintenance and available services, visit AP Auto Services.
Taking action early can help you identify engine management problems before they leave you stranded.
Mobile Mechanic
Serving: Dublin, Swords, Lusk, Rush, Donabate, Skerries, Raheny, Artane, Howth, Bayside, Portmarnock, Donabate, Balbriggan, Drogheda, Dunleer, Dunboyne, Clonee, Citywest, Tallaght, Rathcoole, Newcastle, Lexlip, Celbridge, Ashbourne, Dunshaughlin, Stepaside, Sandyford, Cherrywood, Carrickmines, Leopardstown.
Opening Hours:
Monday β Sunday
08am β 08pm

